Sarkar Wire Mesh / Anti-Slip plywood is made using 100% hardwood and covered with a layer of waterproof phenolic film. The wear side has a rough wire mesh pattern and the reverse side is smooth film or raw plywood as needed. The edges of plywood are sealed with acrylic paint to prevent water penetration. The wire mesh surface has high wear resistance and Anti-Slip properties.
The panels are overlaid with a phenol film and have a wire mesh & chequered pattern imprinted during hot pressing process. During this process a Wire Mesh / Anti-Slip pattern is also applied.
Our standard colour of the Film is brown but can be produced in other colours depending on requirements.
Available non-slip surfaces
Standard Anti-Slip & Chequered pattern applied
- Transport industry (floors for semi-trailers, trailers, buses)
- Containers floors
Face: Keruing (100% Hard Wood)
Core:100% Eco Friendly, High Density – Hardwood
Film:Phenolic 125gsm DYNEA, Finland (Brown) / DONGWA, Korea
Glue: WBP/CWR as required
Density: 672kg/m3 – 800kg/m3
8.2 х 4.1 feet ; 2500 x 1250 mm
Zahlung und Lieferung