The paper mill currently produces fluting/liner papers with two paper machines in operation. The reconstruction concerns modification of the PM 7. The objective of the modernization is to increase the overall machine capacity. At the same time, the stock preparation line will be modified from which the finished stock is pumped to both PMs.
The aim of the reconstruction is to increase the machine output by 25%. From this reason, the wire table will be modified and, in particular, the press part will be completed where a new pick-up press will be installed.
The existing JUMBO presses remain in the position of the second and the third presses. The total reconstruction is carried out in cooperation with the group of companies PAPCEL/ABK. A professional technological audit of the machine drying part will be performed in cooperation with the technologists of the ABK division.
Within the reconstruction of the stock preparation line, the PAPCEL Group will supply an entirely new pulping node with a high-capacity pulper LCV-50 (waste paper processing), equipped with a complete system of the paper stock washing and dewatering. The capacity of the pulping stage is constructed for 420 tpd. In addition, the part serving for the stock coarse separation will be modified.
