DS Smith installs new equipment at its plant in Erlensee, Germany

七月 26, 2016
In the new top class display and consumer packaging plant that DS Smith is currently building in Erlensee, Germany, the first machines are currently being installed, one after the other. One of them is the new machine for the creation of compressed air for production machines, as the company says in the press release received by Lesprom Network.

With this new solution DS Smith is backing the principle of cogeneration and is therefore making a major contribution towards significantly reducing CO² emissions in this are and therefore easing the stress on the environment. This environmentally friendly technology was presented to a wider audience at the ‘Woche der Umwelt’ (Environment Week) that look place Berlin in June.

"According to the previous state of the art, only around 10% of energy used could be converted into compressed air," explains Peter Otto, CEO of Postberg + Co.

The new machine uses a gas-powered combustion engine - the machine is highly efficient thanks to the parallel use of the waste heat produced in compressed air production. With the new system the CO² emissions can be reduced by up to 65% compared to electrical compressors.

DS Smith is a European leading packaging company of customer-specific packaging with emphasis on state-of-the art packaging design and local service close to customer facilities.


標籤: DS Smith Plc

評論

喜歡這一點,你需要註冊。
要做到這一點,請輸入您的姓名和電子郵件地址。
名稱:
姓:
電子郵件:
性別:
如果您已經註冊,
請輸入您的詳細信息 這裡
要留下意見,你需要註冊。
要做到這一點,請輸入您的姓名和電子郵件地址。
名稱:
姓:
電子郵件:
性別:
如果您已經註冊,
請輸入您的詳細信息 這裡
我們歡迎通過相關的意見和數據推動故事的評論。如果你看到一個評論,您認為是無關緊要的或不適當的,可以將其標記為我們的編輯使用報告濫用鏈接。在表達意見的看法,並不代表Lesprom網絡。有關我們註釋策略的更多信息,請參見: http://www.lesprom.com/legal/comment_policy/

標籤


返回頁首