System TM to supply high-speed moulder line to Chugoku Lumber in Japan

六月 14, 2016

System TM managed to win the order of a high-speed moulder line to Chugoku Lumber Co. in Japan. System TM designed the system solution and implemented Microtec scanning equipment in the line. The solution from System TM is a high-speed moulder line for finger joint and glued laminated boards, as the company says in the press release received by Lesprom Network.

The line consist of an automatic infeed system, a heavy duty Opti-Feed 6000. The infeed system is with continuous feed, ensuring that a pack is always ready on the conveyor belt to be fed to the line.

The workpieces are high-speed single-piece fed to a stud carrier that consist of a moisture meter, a Curvescan from Microtec, an automatic out sorting of workpieces for finger joint, a high-speed board turner and a multi head cross-cut saw model MK2, that cuts the workpieces in very exact lengths.

The workpieces that are sorted for finger joint are stacked continuously and the packs are either transported to storage or destacked and fed to a finger jointing line.

The cut workpieces are transported through a Viscan from Microtec before being distributed between two moulders that are running different dimensions. After each moulder, an operator quality sorts the moulded workpieces and they are sorted between two automated Opti-Stack 3000 stacking systems. The line consist of four Opti-Stack 3000 in total.



評論

喜歡這一點,你需要註冊。
要做到這一點,請輸入您的姓名和電子郵件地址。
名稱:
姓:
電子郵件:
性別:
如果您已經註冊,
請輸入您的詳細信息 這裡
要留下意見,你需要註冊。
要做到這一點,請輸入您的姓名和電子郵件地址。
名稱:
姓:
電子郵件:
性別:
如果您已經註冊,
請輸入您的詳細信息 這裡
我們歡迎通過相關的意見和數據推動故事的評論。如果你看到一個評論,您認為是無關緊要的或不適當的,可以將其標記為我們的編輯使用報告濫用鏈接。在表達意見的看法,並不代表Lesprom網絡。有關我們註釋策略的更多信息,請參見: http://www.lesprom.com/legal/comment_policy/
返回頁首