Ghana: 1Q export contract volumes drop 28%

市場: 圆木 / 木材 / 面板 / 合板
七月 1, 2016
The total volume of Timber Industry Development Division (Ghana) approved export contacts in the 1Q 2016 was 86,335 cubic metres, a drop of 28% when compared to approvals in the final quarter of 2015.

There was a steep fall in approvals for export of primary and secondary products, with only the small volume of tertiary product exports registering growth, ITTO reported.

Exports of primary products in the 1Q fell 33% year-on-year due mainly to a decline in shipments of teak logs/billets (-85%).

Secondary product exports also fell (-30%) to a low of around 74,000 cubic metres; while tertiary product exports increased of 67% to 3,428 cubic metres.

In the 1Q sawnwood accounted for 64% (55,409 cubic metres) of the volume of all approved export contracts while plywood accounted for a further 12% (10,292 cubic metres).

Regional West African markets continued to be the major market for plywood, while for tertiary products, such as sliced veneer and kiln dried sawnwood, the main markets were in Europe.

Species such as rosewood (air-dried sawnwood) and high lumber density species such as apa, ekki and denya were mainly for the Chinese market.

Mahogany and cedrella sawnwood along with rotary veneer found a ready market in the US. Middle East and Egyptian markets emerged as a major destination for backing grade veneer, with India the main market for teak sawnwood and gmelina logs.


評論

喜歡這一點,你需要註冊。
要做到這一點,請輸入您的姓名和電子郵件地址。
名稱:
姓:
電子郵件:
性別:
如果您已經註冊,
請輸入您的詳細信息 這裡
要留下意見,你需要註冊。
要做到這一點,請輸入您的姓名和電子郵件地址。
名稱:
姓:
電子郵件:
性別:
如果您已經註冊,
請輸入您的詳細信息 這裡
我們歡迎通過相關的意見和數據推動故事的評論。如果你看到一個評論,您認為是無關緊要的或不適當的,可以將其標記為我們的編輯使用報告濫用鏈接。在表達意見的看法,並不代表Lesprom網絡。有關我們註釋策略的更多信息,請參見: http://www.lesprom.com/legal/comment_policy/
返回頁首